Emergency Battery Operated Power Supply (EBOPS) is designed for a building’s elevator use. It provides lighting & ventilation whenever there is a failure of normal power supply.
Upon power failure, EBOPS will kick in to supply sine wave AC power to keep the lighting and ventilation fans of the elevator running on battery.
It is enclosed in a steel cabinet with a separate battery compartment. It is self ventilated and cooled by conduction and convection. No force cooling is required even at full loading of 110VA or full current charge.
This product is built to comply to the Singapore Standards SS209.
Input power 230VAC 50/60 Hz Output power (sine wave output) 230VAC 50/60 Hz Battery 24V26AH (support 6 hours) Maximum output power (peak power) 120 (200W) Bulk charging in 2 hrs from VBAT=21V 4A Charger output voltage ripple 1.5% AC input voltage range 230V AC +/- 10% Efficiency (TYP) 80% Power factor – battery input (min) 0.85 Output voltage regulation 230V AC +/- 6% Output frequency regulation 50 +/- 1% Total harmonic distortion (max) 5% Over current protection (OCP) more than 105% of peak power Back up input voltage – battery input 21~27V Back up time 6 hours Maximum DIP during AC 500ms Battery connect / disconnect (TYP) 21V
Withstand voltage Input - FG…1.5KVAC, input-output…3.0KVAC, output - FG…500VAC 1min Isolation resistance More than 100Mohm at 250C and 70%RH, output – FG : 500VDC Safety /Construction / Protection Built to meet UL1950 EMC emission Built to meet EN12015 EMC immunity Built to meet EN12016
Operating temperature -10 ~ +50 Degree Celcius Operating humidity 20 – 90 (No dewdrop) %RH Storage temperature -30 ~ +850C Storage humidity 20 – 90 (No dewdrop) %RH Cooling Convection cooling